Hey! So. The issue with some of them is the way you drew the line that suggests a bend or squash. For example, the bottom cylinder. You drew a straight line where the bend happens, but it would be better if you draw a curved line following the form of the shape. This way, the bending is way clearer. You also need to keep in mind what form is overlapping. The top of the box. Since we’re looking at the bottom angle (because we’re seeing the bottom surface), the line will curve upward. If it were the other way around, where we’re looking at the top, then the curve would go downward. If we see both sides, then we could draw a slight curve to suggest that bend. Hope this helps! | Artwod Feedback